CLASSIC SERIES
(U)
Our original line, the ‘one-size fits most’ Class I, Division 1 Modular Extraction Rooms
FOOTPRINTS
85U
Interior Square Feet
85
Exterior Width
10 ft.
Exterior Length
10 ft. 3 in.
Exterior Height
8 ft. 5 in.
120U
Interior Square Feet
120
Exterior Width
10 ft.
Exterior Length
13 ft. 9 in.
Exterior Height
8 ft. 5 in.
150U
Interior Square Feet
150
Exterior Width
10 ft.
Exterior Length
16 ft. 11 in.
Exterior Height
8 ft. 5 in.
180U
Interior Square Feet
180
Exterior Width
10 ft.
Exterior Length
20 ft. 3 in.
Exterior Height
8 ft. 5 in.
215U
Interior Square Feet
215
Exterior Width
10 ft.
Exterior Length
23 ft. 7 in.
Exterior Height
8 ft. 5 in.
THE CLASSIC SERIES INCLUDES THE FOLLOWING:
-
8'2" Interior Height
-
10'0" Exterior Width
-
Base Air Flow Rate: 1000 CFM
-
Purge Air Flow Rate: 2000 CFM
-
Explosion-proof, Class I, Division 1, 2-tube Interior LED Light Fixtures
-
Fire-rated door and exit hardware
-
Extra-long life, flammable gas infrared sensor
-
Supply and Exhaust Ventilation Assemblies - Includes exhaust and supply fans built with explosion-proof construction and CID1 motor assembly
-
Exterior CID2 remote operator switch
-
Interior CID1 manual purge button
-
110W Uninterrupted Power Supply (UPS) - upgraded UPS options available to back up the entire booth system
-
36” wide personnel door sealed by a rubber compression gasket
-
Cross-capture ventilation
-
A fire-rated panic bar for emergency exiting
-
Professional engineer peer-reviewed design
-
UL Certification *Not available for booth configurations
-
Exterior CID2 tri-color light alarm and exterior warning siren / Light alarm and siren set to go off at 10% and 25% of LEL, respectively
-
Fully compliant with applicable OSHA, NFPA, NEC regulations
-
Access Panel with Utility Penetration Plate to easily run heating, cooling, and air lines to approved extraction equipment located inside of the HAL Booth
UL CERTIFIED
The First and Only UL Certified Extraction Booths
The use of flammable and pressurized solvents can create dangerous conditions for workers and buildings. HAL Extraction has worked with Underwriters Laboratories (UL) to develop and certify the first equipment for use in the plant oil extraction industry.
PEER-REVIEWED
HAL Extraction Product Lines Achieves PSI Technical Report Certification in 50 States
HAL Extraction Booths and Hoods have been Peer-reviewed by Pressure Safety Inspectors (PSI)
CONFIGURATIONS
MULTIPLE CONFIGURATIONS AVAILABLE;
CID2 SERIES (D2)
Class I, Division 2 Extraction Booths
Available for the Classic and Intro Series
Designed for use with ethanol-based extraction methods for jurisdictions requiring CID2 ratings
HEIGHT EXTENSION PACKAGE
Height extension for ceilings above 9ft
Installation and assembly available with the expert HAL installation team
Available for models 150U, 180U, 215U
INTRO SERIES (E)
Simplified configuration at a competitive price
Sizing available; 85 sf, 120sf, 150sf, 180sf and 215sf
CID2 Classification available for Intro Series configurations
Restrictions apply